a
Charlotte HVAC Repair

Keep Your HVAC System in Top-Notch Condition

Arrange for heating and cooling maintenance services in Charlotte, NC and surrounding areas

Cool Tech Heating & Air Conditioning provides cooling and heating maintenance services in the Mount Holly, Cornelius, Charlotte NC area. Sign up for a heating and cooling maintenance plan today to extend the life of your HVAC system. When you register for a maintenance plan, we'll service your system once in the fall and once in the spring. During our seasonal inspections, we'll locate any minor issues and repair them before they can snowball into costly repair jobs.

Contact us today to discuss the benefits of our cooling and heating maintenance plan.

See what's on our preventive maintenance checklist

Choose Cool Tech Heating & Air Conditioning for heating and cooling maintenance services in Mount Holly, Cornelius, Charlotte NC.
During your HVAC maintenance checkup, we'll:

 

 

  • Replace filters
  • Inspect and clean burners
  • Test thermostats
  • Check electrical system connections
  • Make sure blower is working properly
  • Clean up HVAC systems and the area around them
  • Check for corbon monoxide
  • Check for cracked heat exchanger  
  • 57 Point Inspection 
  • Clean Condenser
  • Check gas pressure
  • Inspect Ductwork 


 

 

 

 

Call 704-820-6480 today to learn more about our HVAC maintenance services, or to schedule a repair.

Why Is Maintenance So Important?

Why Is Maintenance So Important?
The purpose of preventative maintenance is to keep your HVAC system up and running all season long with no surprise breakdowns, while operating at top efficiency.
You rarely see your HVAC system face to face, so it’s easy to forget about it and neglect it. Imagine doing the same with your car. If you never have the oil changed or refuse to take your car in for any kind of tune-up until the check-engine light comes on, you can’t expect it to last more than a couple of years.
Your HVAC system is the same way. No matter how expensive the system is or what the manufacturer promises, a complicated piece of mechanical equipment is subject to breakdowns and needs repairs every so often. Reduce the incidence of repairs by keeping on top of annual maintenance.
Benefits of Annual HVAC System Maintenance

What can you expect from your newly tuned-up HVAC system? Is the cost of maintenance really worth it? You should consider that some benefits of regular maintenance are immediate while others prevent future problems from developing.

 

Some of the most prominent benefits include:
Lower energy bills: You might assume that since the equipment is heating or cooling your home without any apparent problem that everything is fine. However, have you taken a look at your energy bills lately? A neglected system slowly loses its ability to keep your home comfortable at the same level of efficiency it once did. Just as a car tune-up delivers better gas mileage, your HVAC system consumes less fuel after receiving professional maintenance.

Fewer repairs: Do you hear a strange sound or notice an odd odor coming from your furnace? Calling for a tune-up right away could help catch problems before they become disastrous. For example, a fraying belt could result in strange operating noises. If a technician replaces it in time, you can avoid the expensive repair that results from a snapped belt whipping around inside. By preventing future repairs, annual maintenance pays for itself

Lower chance of a catastrophic breakdown: Everyone wants an incident-free cooling and heating season. After all, it’s incredibly inconvenient and uncomfortable when equipment breaks down on a sweltering summer afternoon or frigid winter night, right when you need your HVAC system most. The odds of this happening when you schedule inspections every year are greatly diminished.

Longer equipment life: Air conditioners, furnaces and other HVAC equipment function best when they’re regularly serviced and cleaned. One malfunctioning part can cause a domino effect that causes the entire system to break down. Regular maintenance prevents this from happening and adds years to your equipment’s lifespan.

Safer equipment operation: A failing HVAC system does more than cost a lot of money to repair; it also can endanger your family. For instance, if the furnace develops a crack in the heat exchanger, carbon monoxide gas can escape and poison the air you breathe. Also, electric HVAC systems can develop a short circuit, which is a serious fire hazard if ignored. Clearly, your family’s safety is yet another reason to schedule annual HVAC system maintenance.

 

Maintenance Tasks You Can Do Yourself

Plan to schedule annual HVAC system maintenance once in the spring for your cooling equipment and again in the fall for your heating system. If you have a heat pump, the combined heating/cooling system should receive maintenance twice a year.
Plan to perform a few maintenance tasks of your own between these formal visits. The following DIY tasks help keep your equipment running smoothly until the next professional visit:
Change the HVAC air filter every month. Some units have an indicator light that tells you when the filter is beginning to become clogged and blocking airflow.
Remove debris from around the outdoor unit.
Hose down the outdoor unit when dirt begins to accumulate on it.
Trim back foliage to at least 18 inches from the outdoor unit.
Keep supply and return registers unblocked by drapes, rugs or furniture.

Maintenance You Should Leave to the Pros

Many homeowners wonder why they can’t just complete an entire tune-up themselves. The fact is a thorough tune-up requires skills, tools and knowledge that only experienced HVAC technicians can deliver.
Here’s what to expect when you call in the pros to perform annual HVAC system maintenance:

 

Check the thermostat: The tech makes sure the thermostat is calibrated correctly to ensure comfort in every season. If you don’t have a programmable thermostat installed, the technician may recommend
one and install it for you on the spot.

Tighten electrical connections: Loose connections are dangerous and can cause improper operation that shortens the equipment’s lifespan. The technician also measures voltage and current on equipment motors.

Lubricate all moving parts: Lack of lubrication causes high amounts of friction in the system. This can cause it to overheat and break down. Adding lubrication helps parts move smoothly against one another, decreasing electricity use and lowering your energy bills.

Inspect the condensate drain: Cooling equipment and condensing furnaces produce condensate when they operate. Under normal conditions, the condensate collects in a pan and drains away to the outside. However,
over time sludge or algae can form in the drain pipe and create a blockage. During times of high usage, the drain pan may overflow and cause water damage to the equipment or your home. A technician checks the
condensate drain to make sure it’s draining properly and cleans it out if necessary.

Check system controls: The start cycle, operation and shut-off sequence should occur in a particular fashion. The technician checks the controls to make sure everything is operating safely and properly.
Clean and adjust the blower: Issues with the blower can decrease equipment efficiency by up to 15 percent. Making adjustments ensures proper airflow and ample home comfort.

Clean the condenser coils (cooling specific): Soiled coils slowly decrease efficiency and make the equipment run longer. Cleaning the coils annually is an important part of maintaining the A/C’s capacity, ensuring lower energy bills and prolonging equipment life.

Check refrigerant charge (cooling specific & heat pump): If the air conditioner was charged too high at installation, you could be paying much more than necessary to cool your home. An undercharged system also can develop if the system has a leak. A technician checks for these circumstances, repairs any leaks that are present, and recharges the system if necessary.

Check fuel line connections (heating specific): Poor gas connections are a fire hazard. They can also cause health problems if fumes are able to escape into your home. Tightening the connections ensures safe operation.

Inspect the gas pressure, burner combustion and heat exchanger (heating specific): Incorrect pressure, a dirty burner or a cracked heat exchanger can result in improper burner operation. These circumstances also can cause unsafe and inefficient operation. Adjusting the pressure and cleaning the burner are two viable options to improve operation and lower your heating bills, but if the heat exchanger is cracked, it’s likely you’ll need to purchase a new furnace.

An important part of preventative maintenance is hiring a contractor with the right skills and experience for the job. Cool Tech Heating & Air Conditioning has over 25 years of experience serving the Charlotte, NC area with superior HVAC services ranging from installation to maintenance to emergency repair.

 

The Platinum Club

Now that you understand the importance of preventative maintenance, we encourage you to join the Platinum Club, an exclusive membership program that offers all the benefits of annual precision furnace and air conditioning tune-ups plus the following:

Two year warranty on repairs
No after-hour or holiday fees
Basic Program Benefits
24-Hour-a-Day Availability
Flat-Rate Pricing Structure
Waived Holiday/After-Hours Fees
Priority Service Scheduling
Payment Options Tailored to Your Budget Customized to Your Home and Your Specific Needs
Peace of Mind

Clearly, annual HVAC system maintenance is something you should take very seriously. Whether your goal is to save money, protect your family, improve efficiency or prevent a mid-season breakdown, annual maintenance can help you accomplish your goals. Contact us today to work with a company that’s dedicated to ensuring your complete satisfaction.

In the Charlotte area, winters can be cold—which is why it is crucial to have a heating system that works safely and efficiently. Sometimes known as a tune-up or inspection, maintenance is essential if you want a heating system to have a long healthy life with minimal breakdowns. Scheduling an annual furnace inspection can ensure your furnace is ready for the winter ahead.

Looking for “furnace maintenance near me” in the Charlotte area? Schedule maintenance for your furnace with Cool Tech Heating & Air Conditioning by contacting us online or giving us a call!

Many furnaces break down because of lack of maintenance. Similar to how your car should get an oil change, your furnace should receive a tune-up once per year. When you schedule an annual heating tune-up, you could see:
Increased efficiency – As part of our inspection checklist, we will make sure your furnace is working at its peak performance levels to ensure it can reach maximum power efficiency.
Lower energy bills – One of the first signs your unit isn’t working properly is a spike in monthly energy bills. Annual maintenance ensures your unit is clean and not working harder than it needs to.
Longer lifespan – When you schedule annual maintenance, you can expect your unit to last longer with fewer major breakdowns.
Fewer breakdowns – Many common breakdowns can be avoided if the unit was properly taken care of. Avoid costly breakdowns and schedule annual maintenance.
Furnace Maintenance Checklist
Cool Tech can work all on makes and models of furnaces whether they are electric or run on natural gas. During a tune-up, our technicians will complete an extensive list of tasks that will help prolong the life of your unit, including:
 

Test and adjust the burners for maximum efficiency
Inspect the heat exchanger for hairline cracks
Inspect and adjust the ignition system
Calibrate the blower assembly
Inspect and test the vent pipe assembly
Test and reset the thermostat
Adjust and measure gas pressure to the unit
Replace disposable filters
Lubricate moving parts
Tighten electrical connections where necessary
Test for continuity and amp draw across the blower motor

Furnace maintenance is not a task to DIY. This comprehensive heating service requires extensive HVAC knowledge and could pose danger to those who don’t know what they’re doing. Leave maintenance to the professionals!
Contact us online now to schedule furnace maintenance in Charlotte, Cornelius, or the surrounding areas!

704-820-6480